The most important part of a CNC Boring and milling machine is the CNC system. Today, we will learn the maintenance methods of the CNC boring and milling machine system with Xingtai Bru Boring and Milling Machine Processing Factory.
Specific maintenance methods for CNC systems:
1/CNC boring and milling machine operators must strictly follow the operating procedures.
2/Efforts should be made to reduce the number of times the CNC cabinet and high-voltage cabinet doors of the CNC boring and milling machine are opened, to avoid oil mist, dust, metal powder, etc. from the processing plant falling on the circuit boards or electronic components in the CNC system, which can cause a decrease in insulation resistance between components and damage to components and circuit boards. Shaanxi Boring and Milling Machine Processing Factory stated that some users in the summer open the door of the CNC cabinet to dissipate heat in order to make the CNC system work overload for a long time. This method is not advisable.
3/Regularly clean the heat dissipation and ventilation system of the CNC boring and milling machine's CNC cabinet, check the normal operation of each cooling fan on the CNC cabinet, and check the air duct filter for blockage every six months or quarter. If there is too much dust accumulation on the filter screen and it is not cleaned in time, it will cause the temperature inside the CNC cabinet to be too high.
4/ The DC motor brushes of CNC boring and milling machines need to be regularly inspected and replaced, because the excessive wear of the DC motor brushes can affect the performance of the motor and even cause motor damage.
5/ Regularly replace the storage battery. Generally, the CNC boring and milling machine system has a rechargeable battery maintenance circuit for CMOS RAM memory components to ensure that the content of its memory can be maintained during periods when the system is not powered on. Therefore, even if the battery has not yet failed, it should be replaced once a year to ensure the normal operation of the system. Shaanxi Boring and Milling Machine Processing Factory reminds everyone that battery replacement should be carried out under the power supply status of the CNC system to prevent information loss in the RAM during replacement.
Remember the maintenance methods for the CNC system of CNC boring and milling machines! The boring and milling machine processing factory reminds everyone that the maintenance of the CNC boring and milling machine's CNC system must be operated by trained personnel and maintained on time, which can increase the service life of the CNC boring and milling machine.
Pусский
العربية
