Due to the fact that CNC Boring and milling machines belong to high-precision equipment, improper operation during transportation and debugging may damage the structure or components of the machine tool, affecting the production accuracy of the machine tool. Below is a brief introduction to the precautions during the transportation and installation of CNC boring and milling machine cores.
When transporting CNC boring and milling machines, a crane or stacker is used, and galvanized steel wire rope is used for transportation. After transportation, attention should be paid to stabilizing the center of gravity of the machine tool. The machine tool should be sent to the factory. Before unpacking, please check the condition of the machine tool according to the instructions to avoid losing the machine tool and equipment during transportation. When unpacking the machine tool of the equipment, the operator must follow the above methods in the instructions for actual operation, Pay special attention to the key parts marked in the manual to prevent damage to the machine tool during equipment adjustment. The disassembly, migration, and installation of the equipment should be carried out by two operators as much as possible to stabilize the center of gravity of the machine tool and avoid physical damage. If manual migration is inconvenient, lifting equipment and electric forklifts can be used to help improve. When installing a CNC boring and milling machine, you must choose a safe position, Avoid the disorderly location of the natural environment and the impact of various smoke and dust on the machine tool, avoid the direction of magnetic film sound, and enable the machine tool to operate; Avoid positions with high vibrations, avoid the impact of vibrations on the machine tool, and avoid inaccurate production and processing; Avoid radioactive contamination of parts that are not optimistic about, avoid the impact of vibration on the machine tool, and compound corrosion of the machine tool; Avoid excessive humidity or exposure to sunlight, as it can affect the metal components of the machine tool at high temperatures. The machine tool should be placed in a relatively wide area with a suitable natural environment, which is conducive to the production, processing, and maintenance of other machines. After selecting the appropriate orientation, the equipment should be equipped with cables and isolation switches.
After the installation of the equipment, adjustments need to be made. The operator needs to adjust the fixation rate, check the X, Y, and Z axes, calibrate the fixed rod, positioning plate, fixed structure, and fixed block, and do a good job in assembly. Secondly, make changes in other aspects, and the level depends on the accuracy of the machine tool operation.
Workers should carefully adjust their levels to restore them to their initial state; Restore other mechanical components to their initial state, adjust the machine tool's shock-absorbing pads, and restore the machine tool to its initial operating state; Adjusting the detailed components of the machine tool, such as the anchor bolts and screws in the CNC blade, avoids the problem of loosening the machine tool parts; All machine tools are designed from scratch. After plugging in the power, check the movement of the machine tool. Then, the operator should do a good job in waterproofing, anti electric shock, anti magnetic, and anti vibration operations to avoid various accidents during the operation of the machine tool, which may affect dimensional accuracy. For example, workers need to spray rust inhibitor on the machine tool. After getting tired of the rust inhibitor, clean the outside world.
Pусский
العربية
